| |
Hitech Wireless 2.4 Ghz 250mW 54 Mbps
|
|
Introduction:
The HTW54G is the choice in high powered radio equipment for wireless network deployment. As an Access Point, the HTW54G utilizes Level 2 Peer-to-Peer Blocking to provide unmatched security for client devices on your wireless network . Its 250mW of RF power, and power-over ethernet function, save wireless network owners money by eliminating the need for additional external amplifiers and power termination . These features also make the HTW54G the best choice for use as a Client Bridge. When paired with a directional antenna, its superior signal quality and range maximize transmission speeds even at the farthest reach of the RF signal. The compact size and multiple mounting options of the HTW54G allow for installation virtually anywhere.
|
Perfect for |
|
Wireless Local Area Network (WLAN) |
|
Wireless Internet Service Provider (WISP) |
|
Hospitality Buildouts |
|
Point-to-Point Long-Range Wireless Links |
|
HotSpot Installations |
|
Specificitions |
|
Modes |
Access Point / Client / Bridge / Repeater |
|
Standards |
IEEE 802.11
IEEE 802.11g WLAN Compliant
Direct Sequence Spread Spectrum (DSSS) |
|
Wireless Frequency Range |
2.4 ~ 2.497 GHz ISM Band |
|
Data Range |
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps |
|
RF Transmit Power |
+25dBm ( 250mW ) |
|
Receiver Sensitivity |
< -85 dBm @ 11Mbps
< -93 dBm @ 1Mbps |
|
Protocols Supported |
TCP/IP,DHCP client,WIreless Bridging WPA,802.11f / IAPP,HTTP,SNMP |
|
Receive Gain |
16dB Max |
|
Security |
Level 2 Peer to Peer Blocking
64/128-bit WEP (RC4)
IEEE 802.1x port-based authentication
MAC address-based access control |
|
Device Management |
Web-based manager
SNMP MIB 1 & MIB 2 |
|
Modulation Techniques |
11b: DSSS (CCK, DQPSK, DBPSK) |
|
Environment |
0~55°C (32~131°F) -
Operating-20~80°C (-4~176°F) - Storage
Humidity (non-condensing) 5%~95% typical |
|
|
|
|
|
| |
 Back |
|
| |
|
|
|
|
|
|
